Skip to main content

Relentless Pro-Series 2.0" - fits Epilog Radius, 24EX, 32EX, TT that uncovers unfound power in your Epilog


MSRP: $289.00
Was: $289.00
Now: $188.95
(You save $100.05 )
(No reviews yet) Write a Review
Calculated at Checkout
Technical Support:
We offer technical support for $100. Often times we save customers money by identifying an alternate source or solution from the original manufacturer. Trade-ins on broken parts mean discounts off your purchase price. Email your trade-in suggestion

Pro-Series 2.0" - fits Epilog Radius, 24EX, 32EX, TT

(see other listings if you have a different model, such as the Legend, 36EXT, or Helix).


Pro-series includes 3 nozzle tips, with different diameter holes to provide flexibility for cut depth penetration and quality. These color coded tips are easily screwed on and off for different material laser cutting needs.

Improved cut quality on nonmetals, especially woods. Reduces charring by pushing smoke and debris down and away from the cut area.

Reduces cut width with focused air stream that pushes smoke and debris away so cutting process performs faster, thus reducing the heat affected area of the cut.

Saves time on cut parts clean-up. With less smoke and debris settling on the face, side, and bottom of the cut, clean-up time is reduced or eliminated.

The Pro-Series works well with autofocus. Simply unscrew the nozzle tip and back to engraving.

The Mahoney brand focus nozzle assembly fits the Epilog Laser Radius laser machine. Product package includes (1) Focus nozzle set; (2) Air hose



  •  This product is a terrific upgrade to improve laser engrave and cut quality as well as throughput on the Epilog Laser model Radius and model 24EX and 32EX and Legend TT Model 7000 and Legend Model 6000.
  • See our other models of this same product if you have the Epilog Helix, Epilog Mini 18, Epilog Mini 24, 24TT, EXT36, or another model.


Indepth Product Information


Industry Leaders recommending Laser Nozzles

Click here for Synrad (metal tube laser manufacturer) to see their recommendations for nozzle air/gas pressure to make the best possible laser cuts.


Click here to read "The Fabricator".  These techniques apply to nonmetals cutting, even though the target audience cuts metals.  Read: "Setup time for a laser can be lengthy when preparing to cut unfamiliar materials. Nozzle size, power, optical focal length, assist gas, gas pressure, speed, and focal length can all influence the process. These parameters are so important to the process that if they are not set correctly, the material cannot be cut."


Market Leaders identify Laser Nozzles for Higher Quality

Click here to see the Trotec standard nozzle and focus lens recommendations for acrylic cutting.


Click here to read about Epilog laser engraver/cutter owners discussing the use of their Epilog cone device.


Click here and search "cone" to see the 2 inch and the 4 inch cone offered by Epilog Laser as an optional product.


Click here to see a video of a competitive nozzle installed on an Epilog Laser machine.  

Click here for a second competitive supplier video.


Click here to see a Trotec laser engraver owner using the nozzle for a highly detailed wood engraving.


Click here to see a super speed Universal Laser with a cone engraving in a competition against a Trotec laser with a cone (nozzle), and witness the cleanliness of the engrave.


Click here for article on Laser cutting of different polymeric plastics (PE, PP and PC) by a CO 2 laser beam.   The authors say, "In the nozzle employed for cutting plastics, the gas jet orifice has a 0.8 mm diameter. Its function is to discharge gas coaxially to the laser beam. The extremely small size of the orifice ensures a thin, punctiform and efficacious jet of gas that makes it possible to obtain the narrowest possible kerf width and, simultaneously, high operating speed thanks to the rapid removal of the molten material. The nozzle–sample distance was fixed at 1 mm, because at this distance it is possible to obtain an optimum gas jet convergence and pressure in the cutting channel."



Impractical for smaller machine laser engraving and cutting, however, the physics of laser cutting flow dynamics can be carried over from metals to plastics. In other words, failures in nice cuts on plastics can turn in to successes with the right nozzle and air pressure.  See these metal cutter industry leaders with their automatic nozzle changers.  Click for LVD. Click for Salvagnini Click for Mitsubishi.


Additional Information


Click for whiteboard presentation named Mahoney Epilog Laser focus assembly lens nozzle introduction.


Click for Synrad's "How to choose the right lens focal length for your application.


Bell Laser provides lenses in all focal lengths provided by the manufacturer, in premium grade (highest quality) and medium grade (value quality).  We provide high quality mirrors as well.  See our other store listings for more information.

With the Pro-S­eries attachment, the nozzle can be removed for engraving, in order to use the autofocus. However, with the cutting, the nozzle is typically set very close to the height of the autofocus, so it is not advised to use autofocus for cutting jobs.  

Bell Laser offers 1.5 inch, 2 inch, and 4 inch focal length lenses with nozzle attachments.  They can be purchased individually or as a combination purchase for all sizes.

Bell Laser offers the pro-series for all models of Epilog Laser, you simply need to order the correct part or tell us your model when ordering.

Each pro-series comes with a premium quality lens.

Customers using the pro-series spend less time cleaning laser cut jobs because the focused air pressure pushes sticky fumes and ash down and away from the material while cutting.  Engraving jobs are cleaner as the engraving has less soot.